Align
Align
Align
Use hand tools ONLY
Use hand tools ONLY
IS297-22F
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
Page 8/27
3 Louver Guides Installation:
• On side housing panels with J&D logo align indicated edges of louver guides, as shown below
• Using the included
#3 Phillips Bit from Bag 1 (Tools)
and (5) #14-10 x 2”
Screws from
Bag 2 (Part 3)
, secure each louver guide to the housing
9
If installing the 3 Louver AirBlaster proceed to Step 9.
If installing the 4 Louver AirBlaster skip to Step 22.
3 Louver Installation:
• Assemble
(12) 5/16”-18 x 7/8”
Bolts
and (12) 5/16”
Washers from Bag 4 (Motor Key &
Louver Hardware)
• Using only hand tools
(DO NOT USE IMPACT DRIVER)
secure each louver to the louver
guides, as shown below
10
