Jamar TRAX Apollyon Plus II, User Manual

Page: 42 / 88

TRAX Apollyon Plus II User’s Manual
2-18
This screen shows the road
tube diagnostics (refer to
page 2-10), which allows
you to check the strength
of the pulses coming from
the tubes while the study is
being conducted. By using
this screen, you can check to see if any road tubes are starting to
fail while you are still collecting data.
Ending a Count
There are several ways to end a count. The most common way is to manually
turn the TRAX Apollyon Plus II off. To turn the Apollyon Plus II off, press
the POWER key and hold it down for 5-6 seconds. The Apollyon Plus II
will turn off and the count will be stored in its internal memory. Additional
studies can then be conducted with the unit. The TRAX Apollyon Plus II
can hold up to 150 different studies in its memory.
You can also end the count through
the options accessed by hitting
the DO key while a study is in
progress.
The
New
option will end the cur-
rent count and immediately begin a
new one with the same default settings. This option is useful if you want to
download data you have collected, but still want to leave the Apollyon Plus
II in place. The
Stop option will end the current count without restarting it.
The Back option will return you to the Status screens.
A:
B:
C:
D:
Volume Only Status Screen #6
BACK NEW STOP
Stop Count Screen