Jamar TRAX Apollyon Plus II, User Manual

Page: 39 / 88

2-15
STAT
When you select STAT from
the Count Start-up menu, you
are shown some summary in-
formation on the configuration
of the TRAX.
The first screen shows the tube layout selection and the Dead Time
setting. Press the TAB key to see the current date and time, as well as
the Site Code. After you have tabbed through the available screens, you
will be returned to the Count Start-up Menu.
START
When you select Start from the Count Start-up menu, the TRAX Apol-
lyon Plus II will begin recording data. You will be shown a screen that
displays the data as it is being collected. There are several screens
available for viewing while the TRAX Apollyon Plus II is collecting
data. Press the TAB key to page though the available status screens.
The following are examples of the types of screens that are available
for review depending on the study you have programmed.
Basic Data Status Screens
The top line of this screen
gives the layout that has
been selected (L6) and the
type of study being done
(Basic). The next two lines
represent the tubes that data
is being recorded on (A, B).
As the tires from an axle strike the tubes, an asterisk is recorded
in the appropriate channel. The bottom line tells you what number
count this study is (CNT:02), the percentage of memory available
(MEM:95%) and the battery voltage (3.6v).
Chapter 2 — Operational Features of the TRAX Apollyon Plus II
L5: Two Equal Tubes
with spacing; 1 dir
DT: 35 ms
Stat Screen
L06 BASIC-DATA
A: ******
B: ******
CNT: 02 MEM:95% 3.6v
Basic Data Status Screen #1