JAMAR Technologies TRAX I, User Manual

Page: 18 / 64

TRAX I User’s Manual
2-10
Site Code
The data in the TRAX I in-
cludes the date and time that the
study was done, but no direct
information on where the study
was done. Correct use of the Site Code is a way for you to guarantee
that the data you collected at a particular site was indeed collected
there. To enter a Site Code, press DO while YES is flashing. You may
then enter a numerical code up to 12 characters using the numbered
keys on the TRAX I. If you do not wish to use a Site Code, TAB until
NONE is flashing and press DO. NOTE: Pressing DO while EXIT is
flashing will exit you out of the count setup and back to the Main
Menu.
After you have entered your Site Code, you will be taken to the Count
Start-Up Menu.
YES NONE EXIT
Enter num. Site Code
Press DO to accept