JAMAR Technologies TRAX I, User Manual

Page: 15 / 64

TESTS
MEMORY Press DO
while Memory is flashing
and the TRAX I automati-
cally starts testing the
memory. The test does not affect any data that is stored in the unit.
DISPLAY To test the DISPLAY, press DO after the various
screens that are displayed.
KEYS Press any of the keys and the TRAX I will display
the key you pressed. Press DO to exit.
SER. PORT Plug a test connector into your serial port. The
connecter must short the 2 & 3 pins. NOTE: This
test will fail if a test connector is not used prop-
erly.
Highlight EXIT and press DO to leave the DEFAULTS Menu. With EXIT
highlighted once again, press DO to exit the UTILITIES Menu and return
to the MAIN Menu.
MEMORY DISPLAY
KEYS S.PORT EXIT
Test internal data
storage memory
2-7
Chapter 2 — Operation of the TRAX I