JAMAR Technologies TRAX I, User Manual

Page: 10 / 64

TRAX I User’s Manual
Start-up Screens
A four-line, 20-character LCD dis-
play, located in the middle of the
TRAX I’s front panel, is used to dis-
play current options and status.
NOTE: The display of the TRAX
I has a power-saving feature that
turns off the screen if the unit has
not been disturbed for several min-
utes. To bring the display back up,
simply hit any of the gray keys on
the keypad.
After you power on the TRAX I the
sign-on screen is displayed. This
shows the version number of the
firmware in the TRAX I in the lower
right-hand corner.
The second screen, as shown below, displays the tube spacing that is set in
the TRAX I, the amount of memory the counter contains, the amount of
memory remaining for new studies, the number of counts stored in memory,
the status of the battery and the time and date that is set in your TRAX I.
After a few seconds, the screen clears and the Main Menu is displayed.
2-2
Tube spacing: 8.0 ft
1024K Mem: 99% Avail
Counts: 02 bat: 6.4v
TD 10:25:12 02/13/98