JAKA Zu
®
7 - V1.1 17
Fig 3-5
3.2.2 Important safety instructions
DANGER: 1. Make sure the robot is properly and securely bolted in place.
2. The mounting surface must be shockproof and sturdy.
DANGER: 1.
Make sure the tool
is properly and securely bolted in place.
2.
Make sure that the tool is constructed such that it cannot create a
hazardous situation by dropping a part unexpectedly.
DANGER: 1. Make sure that the electrical cabinet and cables do not come
into contact with liquids. A wet electrical cabinet could cause death.
2. The electrical cabinet must not be exposed to dusty or wet
environments that exceed IP20 rating. Pay special attention to environments
with conductive dust.
CAUTIONS: If the robot is bathed in water over an extended time period it
might be damaged. The robot should not be mounted in water or in a wet
environment.
3.2.3 Robot Installation Options
The robot has an attitude and position adaptation function. It can be mounted in various ways, such as