JAI SW-4000TL-10GE, User Manual

Page: 17 / 64

Item Setting value / selectable range
Trigger Mode On
Trigger Selector Line Start
Trigger Source Any
Trigger Activation LevelHigh
(high-level duration)
,
LevelLow
(low-level duration)
Exposure Mode TriggerWidth
(control via trigger width)
Item Setting value / selectable range
Trigger Mode On
Trigger Selector Line Start
Trigger Source Any
Trigger Activation Rising Edge
(rising edge of input signal)
,
Falling Edge
(falling edge of input signal)
Exposure Mode Timed
(control via exposure time)
Exposure Time Varies depending on settings.
SW-4000TL-10GE
— 17 —
Step 5 Configuring Basic Settings for the Camera
1
Set [Exposure Mode] to [Timed].
2
Specify the exposure time in [Exposure Time].
3
Set [Trigger Mode] to [On] and set [Trigger Selector] to [Line Start].
4
If necessary, change the [Trigger Source], and [Trigger Activation] settings.
When Controlling the Exposure Time Using Specified Exposure Times
Configure the settings as follows.
■ Control via External Triggers
When Controlling the Exposure Time Using the Pulse Width of the Trigger
Input Signal
Configure the settings as follows.
1
Set [Trigger Mode] to [On] .
Because this camera automatically performs several correction functions at startup, the first
three lines captured after powering on or resetting the camera will contain incorrect data.
To ensure accuracy, you should not use the first three lines acquired after any power-up or
reset.
Caution