Setting range
Default value
Description
Configure image capture settings.
0:SingleFrame,
1:MultiFrame,
2:Continuous
Countinuous
Select the image capture mode.
ー
ー
Start image capture.
ー
ー
Stop image capture.
1〜65535
1
In [MultiFrame] mode, set the number of frames to capture.
0.125〜
Display the frame rate as a frequency. (unit: Hz)
The maximum value varies depending on the PixelFormat setting and the
ROI setting.
0:AcquisitionStart,
1:AcquisitionEnd,
3:FrameStart
AcquisitionStart
Select the trigger operation.
TriggerMode
0:Off,
1:On
Off
Select the trigger mode.
TriggerSoftware
ー
ー
Execute the software trigger.
TriggerSource
ー
ー
Select the trigger signal source.
[Setting range]
7: PulseGenerator0, 8: PulseGenerator1, 9: PulseGenerator2
10: PulseGenerator3, 11: UserOutput0, 12: UserOutput1
13: UserOutput2, 14: UserOutput3,
19: Software,
23: Line4,
24: Line5
26: Line7,
29: Line10,
36: Nand0Out
37: Nand1Out
TriggerActivation
1:RisingEdge
2:FallingEdge
3:LevelHigh
4:LevelLow
RisingEdge
Select the polarity of the trigger signal
(i.e., location of signal at which trigger is applied).
TriggerOverlap
1:ReadOut
ReadOut
Select the trigger overlap operation. (ReadOut fixed)
TriggerDelay
0〜500000
0
Set the time of exposure start from trigger input. (unit: μs)
0: Off,
1: Timed,
2: TriggerWidth
Timed
Select the exposure mode.
60 μs 〜
ー
Set the exposure time. (μs)
The specifiable range varies depending on the operation modes and CXP
setting.
The actual exposure time is the set value minus the image sensor offset.
0: Off,
1: Once,
2: Continuous
Off
Set whether to enable auto exposure.
AcquisitionFrameCount
AcquisitionStop
AcquisitionStart
AcquisitionMode
ExposureTime
ExposureMode
TriggerSelector
AcquisitionControl
AcquisitionFrameRate
Item
ExposureAuto
SP-45001M-CXP2A/SP-45001C-CXP2A
- 61 -
