JAI SP-20000M-PMCL, User Manual

Page: 88 / 118

SP-20000M-PMCL / SP-20000C-PMCL
- 86 -
11.2. Specification table
Specifications SP-20000M-PMCL SP-20000C-PMCL
Scanning system Progressive scan, 4-Tap or 8-Tap output
Synchronization Internal
Interface
Camera Link Specfications
（
V.2.0 RC2
）
, Conforming with PoCL specifications
Pixel clock: 80 MHz (Standard) or 60 MHz can be selected in conjunction
with sensor clock
Image sensor (CMV-20000) 35 mm Monochrome CMOS 35 mm Bayer color CMOS
Aspect ratio 4:3
Effective image size 32.77 (h) x 24.58 (v) mm 41 mm diagonal
Cell size 6.4 (h) x 6.4 (v)

m
Effective Image output pixel 5120 (h) x 3840 (v) 5120 (h) x 3840 (v)
Sensor Pixel Clock 39.16 MHzMHz (1X8–1Y Standard operation)
Acquisition
Frame rate
1X8–1Y
30 fps (Max) to 8 sec
Maximum on 80-bit Configuration
30 fps (Max) to 8 sec
Maximum on 80-bit Configuration
1X4–1Y
15 fps (Max) to 8 sec
Maximum on Medium Configuration
15 fps (Max) to 8 sec
Maximum on Medium Configuration
1X2–1Y
7.5 fps (Max) to 8 sec
Maximum on Base Configuration
7.5 fps (Max) to 8 sec
Maximum on Base Configuration
EMVA 1288 Parameters
Absolute sensitivity
Maximum SNR
10-bit output format
16.05 p (λ = 525 nm)
40.24dB
10-bit output format
18.14 p (λ = 530 nm)
38.32dB
SNR (traditional method)
53dB (Typical)
(0dB gain, Black)
51dB (Typical)
(0dB gain, Green Pixel Black)
Image
Output
Format
Digital
Full image 5120 (h) x 3840 (v) Bayer 5120 (h) x 3840 (v)
Binning
Horizontal
1: 5120(h), 2: 2560(h)
(frame rate does not change)
—
Binning Vertical
1: 3840(v), 2: 1920(v)
(frame rate does not change)
—
ROI
Height 2
～
3840 lines, 2 lines / step 2
～
3840 lines, 2 lines / step
OFFSET Y 0
～
3838 lines
、
2 lines / step 0
～
3838 lines , 2 lines / step
Width
8
～
5120 pixels 8
～
5120 Pixels
1X 8–1Y 8 pixels/step 1X 8–1Y 8 pixels/step
1X4–1Y 8 pixels/step 1X4–1Y 8 pixels/step
1X2–1Y 8 pixels/step 1X2–1Y 8 pixels/step
OFFSET
X
0
～
5112 pixels 0
～
5112 pixels
1X8–1Y 8 pixels/step 1X8–1Y 8 pixels/step
1X4–1Y 8 pixels/step 1X4–1Y 8 pixels/step
1X2–1Y 8 pixels/step 1X2–1Y 8 pixels/step
Bit assignment 8-bit , 10-bit
8-bit , 10-bit
Video
send
mode
Sequence ROI ROI, Gain and Exposure time can be set for 10 indexes in sequence output by trigger
Multi ROI Maximum 8 ROIs can be set in one frame and are output as one video
Acquisition Mode Continuous/Single Fraem/Multi Frame
Trigger mode Acqusition: Acquistion Start/ Acquistion End Exposure: Frame Start
Trigger option Trigger Overlap (Only Frame Start), PIV
Trigger input signal
Line 4 (TTL 1),Line7(Camera Link) ,Pulse Generator 0/1/2/3, Soft Trigger
Line 10(TTL2), Line 11(LVDS)