SP-20000M-PMCL / SP-20000C-PMCL
- 9 -
4.
Locations and functions
4.1
Locations and functions
Lens mount
F-mount (Note *1)
10-pin connector
AUX connector for TTL IN/OUT and LVDS IN
LED
Indication for power and Trigger input
12-pin connector
DC+12V and Trigger input
Camera Link Connector 2
Digital video output (Medium and Full configuration) (Note *2)
Camera Link Connector 1
Digital video output (Base, Medium and Full config.) (Note *2)
Mounting holes M3 depth 5 mm for fixing the camera to the tripod base or
direct installation (Note *3)
*1) Note: Rear protrusion on F-mount lens must be less than 40.0 mm.
*2) Note: When a Camera Link cable is connected to the camera, please do not excessively tighten
screws by using a driver. The Camera Link receptacle on the camera might be damaged.
For security, the strength to tighten screws is less than 0.147 Newton meter (Nm).
Tightening by hand is sufficient in order to achieve this.
*3) Note: The part number for the tripod adapter plate (with 1/4"-20 thread) is MP-42 (option).
Fig. 1 Locations
