— 21 —
GO-5100M-PGE / GO-5100C-PGE
Step 5: Adjusting the Image Quality
Adjust the image quality using the gain and white balance (GO-5100C-PGE only) functions.
To adjust the image quality
The display level must be changed from [Beginner] to [Guru].
Adjusting the Gain
Adjust the sensitivity via the analog gain (i.e., master gain).
For details on gain control, see “Gain Control” (page 32) in the “Main Functions” section.
■
Manual adjustment
1
Expand [Analog Control], and set [Gain Auto] to [Off].
([Off] is the default setting.)
2
Configure the gain.
u
Expand [Analog Control], and select the gain you want to configure in [Gain Selector].
•
For the GO-5100M-PGE, only [Analog All] (master gain) can be configured.
•
For the GO-5100C-PGE, [Analog All] (master gain), [Digital Red] (digital R gain), and [Digital
Blue] (digital B gain) can be configured individually.
v
Configure the gain value in [Gain].
•
[Digital All] (master gain) can be set to a value from x1 to x16 (0 dB to +24 dB) the analog
gain value. The resolution is set in x0.01 steps (0.05 dB to 0.08 dB depending on the setting
value). Values are configured by multipliers. For example, the values set for x1 and x16 are
100 and 1600 respectively.
•
For the GO-5100C-PGE, the [Digital Red] (digital R gain) and [Digital Blue] (digital B gain)
can be set to a value from x0.45 to x5.62 (–7 dB to +15 dB) the [Digital All] (master gain)
value. The resolution is set in 0.1 dB steps. Specify 0 for 0 dB, negative values for settings
below 0, and positive values for settings above 0.
Adjusting the White Balance (GO-5100C-PGE only)
Adjust the white balance using R and B gain. The white balance can also be adjusted automatically.
■
Manual white balance adjustment
1
Expand [Analog Control], and set [Balance White Auto] to [Off].
([Off] is the default setting.)