JAI GO-5000M-PGE-UV, User Manual, Page: 39 / 93

GO-5000M-PGE-UV User Manual (Ver. 1.2) Main Functions
- 39 -
Pulse Generator Clear Source
The following clear source can be selected as the pulse generator clear signal.
Pulse Generator
Clear Source Item
Description
Low Connect Low level signal to Clear Source for the pulse generator. Default setting
High Connect High level signal to Clear Source for the pulse generator.
Frame Trigger Wait Connect Frame Trigger Wait signal to Clear Source for the pulse generator.
Frame Active Connect Frame Active signal to Clear Source for the pulse generator.
Exposure Active Connect Exposure Active signal to Clear Source for the pulse generator.
FVAL Connect FVAL signal to Clear Source for the pulse generator.
LVAL Connect LVAL signal to Clear Source for the pulse generator.
Action 0 Out Connect Action 0 output signal to Clear Source for the pulse generator.
Action 1 Out Connect Action 1 output signal to Clear Source for the pulse generator.
User 0 Out Connect User 0 output signal to Clear Source for the pulse generator.
User 1 Out Connect User1 output signal to Clear Source for the pulse generator.
Line 5 Opt 1 In Connect Opt 1 In signal to Clear Source for the pulse generator.
Nand0 Out Connect NAND 0 output signal to Clear Source for the pulse generator.
Nand1 Out Connect NAND 1 output signal to Clear Source for the pulse generator.
Pulse Generator Inverter
Clear Source Signal can have polarity inverted.
Pulse Generator Setting table
Display Name Value
Clock Pre-scaler 1 to 4096
Pulse Generator Clock (MHZ) [Pixel Clock:48 MHz]÷[Clock Pre-scaler]
Pulse Generator Selector - Pulse Generator 0
- Pulse Generator Length 1 to 1048575
- Pulse Generator Length (ms) ([Clock Source]÷[Clock Pre-scaler])
-1
x [Pulse Generator Length]
- Pulse Generator Frequency (Hz) [ Pulse Generator Length (ms)]
-1
- Pulse Generator Start Point 0 to 1048574
- Pulse Generator Start Point (ms) ([Clock Source]÷[Clock Pre-scaler])
-1
x [Pulse Generator Start Point]
- Pulse Generator End Point 1 to 1048575
- Pulse Generator End Point (ms) ([Clock Source]÷[Clock Pre-scaler])
-1
x [Pulse Generator End Point]
- Pulse Generator pulse-width (ms) [ Pulse Generator End Point (ms)] - [ Pulse Generator Start Point (ms)]
- Pulse Generator Repeat Count 0 to 255