![background image](http://html.mh-extra.com/html/jai/go-5000m-pge-uv/go-5000m-pge-uv_user-manual_631513023.webp)
GO-5000M-PGE-UV User Manual (Ver. 1.2)
Preparation
- 23 -
Step 5: Change the Camera Settings
This section explains how to change settings by describing the procedure for changing the output
format as an example.
Configure the Output Format
Configure the size, position, and pixel format of the images to be acquired. The factory settings are as
follows. Change the settings as necessary.
Factory default values
Item
Default Value
ImageFormatControl
Width
2560
Height
2048
OffsetX
0
OffsetY
0
PixelFormat
Mono8
Example: Configure the Width of ImageFormatControl
1. By selecting the item of Width, you can change the value as shown below.
Note:
Depending on the setting item, you need to change visibility. Please switch visibility
(Beginner / Expert / Guru) as necessary.
Summary of Contents for GO-5000M-PGE-UV
