![background image](http://html1.mh-extra.com/html/jai/go-5000c-pge/go-5000c-pge_user-manual_631434046.webp)
GO-5000M-PGE / GO-5000C-PGE
- 44 -
t1
t2
t3
10 μs (Min)
61 μs
5L to 6L
Fig.28 Timed
8.6. Trigger width mode
In this mode, the exposure time is equal to the trigger pulse width. Accordingly, longer
exposure times are supported. Additional settings determine if the trigger pulse can be accepted
during the exposure period.
Note: As the exposure time is shortened against an input trigger width, the input trigger width
should be “the necessary exposure time plus 8.2 μs”.
Primary settings to use this mode
Exposure Mode:
Trigger Width
Trigger Mode: ON
Trigger Source: Opt IN (6p connector)
Trigger Option: OFF
Optical Filter Selector: 10μs
Minimum interval of the trigger
Read out mode
Minimum trigger interval
Full
45.2 ms – 3 µs
ROI 2/3 (Height=1365)
30 ms – 3 µs
ROI 1/2 (Height=1024)
22.4 ms – 3 µs
ROI 1/4 (Height=512)
11.4 ms – 3 µs
ROI 1/8 (Height=256)
5.8 ms – 3 µs
1/2V Binning (Note )
22.4 ms – 3 µs
Note
:
GO-5000M-PGE only
Trigger
CMOS
Exposure
FVAL
Exposure
Active
Exposure Period
t3
t1
t2