![background image](http://html1.mh-extra.com/html/jai/go-5000c-pge/go-5000c-pge_user-manual_631434014.webp)
GO-5000M-PGE / GO-5000C-PGE
- 12 -
5. Installation and preparation
Before starting operation, check to make sure that all equipment is appropriate and is connected in
the right manner.
Fig3 Basic system
5.1 Lens used
The GO-5000-PGE employs a 1-inch CMOS imager. It is necessary to select a 1-inch C mount lens if
the full resolution of the camera is to be utilized. The imager used in the GO-5000-PGE measures
16.392 mm diagonally, which is slightly larger than the standard 16 mm diagonal of the 1-inch
format. Please consult with your lens provider to select a 1-inch lens able to cover 16.392 mm
diagonally, otherwise the image captured may show vignetting.
It is possible to use C mount lenses with an optical format smaller than 1-inch, provided a less-than
full-resolution ROI is going to be used. For example, a centered ROI of 1920 x 1080 pixels (HD
format) will fit inside the image circle of most standard 2/3-inch C mount lenses. Likewise, a
centered VGA ROI (640 x 480 pixels) can be accommodated by a standard 1/3-inch C mount lens.
The rear protrusion on any lens used must be less than 10 mm.
The focal length of lens used is estimated by the following formula.
Focal length =
𝑊𝐷/(1 + 𝑊/𝑤)
Here, WD: Working distance (the distance between lens and object)
W: Width of object
w: Width of sensor (the GO-5000-PGE is 12.8 mm)
①
Lens
Connecting to PC
1-inch, C mount
②
PC
③
NIC
④
JAI SDK
➄
LAN Cable
Hirose 6P
➅
DC IN / Trigegr IN
External Trigger