![background image](http://html1.mh-extra.com/html/jai/go-5000c-pge/go-5000c-pge_user-manual_631434040.webp)
GO-5000M-PGE / GO-5000C-PGE
- 38 -
The setting range in Acquisition Frame Rate is:
Shortest
to
Longest
Inverse number of time
required to drive all pixels in
the area set by ROI
command or
inverse number of time
required to transmit one
frame data
to
0.125 Hz (fps) = 8 seconds
For the above setting, Acquisition Frame Rate is used and its unit is Hz (fps).
Acquisition Frame Rate: 4172 Hz (fps) to 0.125 Hz (fps)
Note: The acquisition frame rate may be limited to the maximum value which will fit within the
GigE bandwidth.
Fig.26
How to determine the maximum frame rate
8.1.5 Calculation of the maximum frame rate
As mentioned in the chapter 8.1.4, the maximum frame rate is limited by either the sensor frame
rate or GigE bandwidth. The smaller value is the maximum frame rate of the camera.
(A) Calculation of sensor maximum frame rate (Frame Rate Max A)
[Sensor output maximum frame rate] = 1 / (((48000000/4)) x A) x ([Height
*1
] + 10))
(B) Calculation of GigE bandwidth maximum frame rate (Frame Rate Max B)
[GigE Bandwidth maximum frame rate] = 1000000/ [Frame period]
[Frame period] = round down
*2
(1000000/round down
*3
((0.94 * 1000000000)/ [Total bit]))
[Total Bit] = [Width
*4
] x ([Height
*1
] + 10) x B
Frame Rate Max A
=
Calculate the maximum frame rate
within sensor output possible range
Frame Rate Max B
=
Calculate the maximum frame rate
within GigE output band width
Frame Rate Max
depends on
Frame Rate Max A
Frame Rate Max
depends on
Frame Rate Max B
A < B
A > B