JAI EL-2800M-PMCL User Manual Download Page 9 | Manualshive

Page: 9 / 87

background image

EL-2800M-PMCL / EL-2800C-PMCL

- 7 -

1.

General

The EL-2800M-PMCL and EL-2800C-PMCL are the first new Elite Series cameras to be introduced.
They provide high picture quality, such as high sensitivity and low noise, suitable for machine vision
applications.  The  EL-2800M-PMCL  is  a  monochrome  progressive  scan  CCD  camera  and  the
EL-2800C-PMCL  is the equivalent  Bayer  mosaic  progressive scan CCD camera.  Both  are  equipped
with  a  2/3-inch  CCD sensor  offering  2.83 million pixels  resolution  and  a  4:3  aspect  ratio.    They
provide 54.7 frames per second for continuous scanning with 1920 x 1440 full pixel resolution for
both monochrome and raw Bayer output.

8-bit,  10-bit  or  12-bit  output  can  be  selected  for  both  monochrome  and  Bayer  outputs.  The
EL-2800C-PMCL is also capable of performing in-camera color interpolation to produce 24-bit (8-bit
per color) RGB output at 15.8 fps.    Video output is via a Mini Camera Link interface supporting both
Base  and  Medium  configurations.  A  full  pixel  readout,  partial  scan  readout,  or  binning  mode
(monochrome only) can be selected depending on the application.

EL-2800M-PMCL and EL-2800C-PMCL have various comprehensive functions needed for automated
optical inspection applications, such as solid state device inspection or material surface inspection.
They incorporate video processing functions such as a look-up table, flat field shading compensation
and blemish compensation in addition to fundamental functions such as trigger, exposure setting
and video level control.

As a common Elite Series feature, a new connector for lens control is employed. EL-2800M-PMCL
and  EL-2800C-PMCL  support  P-iris  and  motor-driven  lenses  as  standard  lens  control  capabilities.
Factory  options  are  available  to  configure  this  connector  to  support  DC  iris  systems  as  well  as
provide a video iris output signal, or to provide additional TTL IN and OUT lines.

The latest version of this manual can be downloaded from: www.jai.com
The latest version of the Camera Control Tool for the EL-2800M-PMCL and EL-2800C-PMCL can be
downloaded from: www.jai.com
For camera revision history, please contact your local JAI distributor.

2. Camera composition

The standard camera composition is as follows.

Camera body

1

Sensor protection cap 1
Dear Customer (sheet) 1

The following optional accessories are available.

Tripod base

MP-42

Power supply unit

PD-12 series

«
...
7
8
9
10
11
...
»

Summary of Contents for EL-2800M-PMCL
























































































Reviews:

No comments

Related manuals for EL-2800M-PMCL

Brand: Samsung Pages: 44

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 104

Lumix DMC-GH2EB

Brand: Panasonic Pages: 200

Brand: Panasonic Pages: 82

Brand: Arecont Vision Pages: 2

Brand: Monacor Pages: 8

Brand: Olympus Pages: 2

Brand: NORAUTO Pages: 43

Brand: HIKVISION Pages: 13

Brand: Eclipse Security Pages: 37

Brand: D-MAX Pages: 19

Brand: BenQ Pages: 38

Brand: Kodak Pages: 39

AgfaPhoto WP8000

Brand: AGFA Pages: 20

Brand: JAI Pages: 64

Visualizer VZ-5B

Brand: WolfVision Pages: 5

Brand: Astrel Instruments Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands