JAI EL-2800M-PMCL User Manual Download Page 55 | Manualshive

Page: 55 / 87

background image

EL-2800M-PMCL / EL-2800C-PMCL

- 53 -

9. Camera Control Tool

In the EL-2800M-PMCL and EL-2800C-PMCL, control of all camera functions can be done by the

JAI SDK and Control Tool software. All controllable camera functions are stored in an XML file

inside of the camera. The JAI SDK and Control Tool software can be downloaded from
www.jai.com.

If you need to use the Short ASCII communication protocol and associated control tool, please
contact your local JAI representative.

Specific notes regarding Control Tool use:

1. For EL-2800-PMCL, the JAI SDK and Control Tool 2.0 can be used to control the camera,

provided the  PC  on  which  the  JAI software  is  installed  is  connected to  the camera  via  a
GenCP-compliant  Camera  Link  frame  grabber.  Many  frame  grabber  vendors  also  provide
their own GenICam control tool software, as do a number of third-party software companies.
Software conflicts can occur between these GenICam tools and the JAI SDK and Control Tool
causing one or both tools to function improperly. Therefore, if you intend to use the JAI SDK
and Control Tool you should A) not install any other GenICam software on your host PC, or B)
install the JAI SDK and Control Tool last, after installing any other software. This will, in
most  cases,  ensure  that  the  JAI  SDK  and  Control  Tool  functions  properly.  If  not,  please
contact the frame grabber manufacturer or JAI to determine other ways to eliminate any
software conflict.

          2. The frame grabber used must be compliant with Camera Link Specification v1.1 or greater

in order to communicate with the JAI SDK and Control Tool. If it is not, the JAI SDK and
Control Tool cannot be used, and the Short ASCII communication protocol and associated
control tool should be used instead.

«
...
53
54
55
56
57
...
»

Summary of Contents for EL-2800M-PMCL
























































































Reviews:

No comments

Related manuals for EL-2800M-PMCL

Brand: Samsung Pages: 105

Brand: Samsung Pages: 131

Brand: Samsung Pages: 131

Brand: Samsung Pages: 120

Brand: Samsung Pages: 120

HZ10W - Digital Camera - Compact

Brand: Samsung Pages: 22

Brand: Samsung Pages: 6

Brand: Samsung Pages: 214

Brand: Samsung Pages: 34

GX-20 - Digital Camera SLR

Brand: Samsung Pages: 163

Brand: Samsung Pages: 95

TL320 - Digital Camera - Compact

Brand: Samsung Pages: 102

Brand: Samsung Pages: 132

EC-NV4ZZSBA/US - NV4 Digital Camera

Brand: Samsung Pages: 119

S85 - Digital Camera - Compact

Brand: Samsung Pages: 110

Brand: Samsung Pages: 10

Brand: Samsung Pages: 46

Brand: Samsung Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands