EL-2800M-PMCL / EL-2800C-PMCL
- 59 -
2.3 Switching baud rate between PC and camera
Camera always starts up with 9600bps. This can be switched to higher baud rates after a
communication has been established. When switching to other baud rate the procedure is as
follows.
e.g. Change baud rate to 115200bps
1. Confirm baud rates camera supported
Send to camera:
SBDRT? <CR><LF>
Camera response:
SBDRT=31(0x1F)<CR><LF>
2. Request new baud rate
Send to camera:
CBDRT=16(0x10) <CR><LF>
Camera response:
COMPLETE<CR><LF>
(Change baud rate to 115200bps)
3. Rewrite new baud rate again with new baud rate (Confirmation command)
Send to camera:
CBDRT=16(0x10) <CR><LF>
Camera response:
COMPLETE<CR><LF>
In case the camera does not receive the confirming command with new baud rate within
250ms after sending the acknowledge it falls back to the original baud rate (9600bps).
2.4 Command list (Short ASCII command)
2.4.1 GenCP Bootstrap Register
Name
Interface
Acce
ss
Short
ASCII
Values
MIN
MAX
DEFAUL
T
Description
DeviceVendorNa
me
I String
R/O
DVN
"JAI Ltd., Japan"
-
-
-
DVN
?<CR><LF>
DeviceModelNa
me
I String
R/O
MD
-
-
-
MD
?<CR><LF>
DeviceVersion
I String
R/O
DV
Indicate device version
(e.g. “0.1.0.0” )
-
-
-
DV
?<CR><LF>
DeviceID
I String
R/O
ID
Serial Number
-
-
-
ID
?<CR><LF>
DeviceUserID
I String
R/W
UD
User can save and load
free text.
(12 or less characters)
UD
=[Param.]<CR><LF
>
UD?<CR><LF>