BM-500GE / BB-500GE
2
BB-500GE-S Supplement
BB-500GE-S is specially designed to use with the external strobe light.
#7 and #8 pins on Hirose 12P connector are used for an optical output 1 in the standard
version but in the BB-500GE-S, they are used for the open collector output to interface with
the external strobe light.
The following drawing shows the typical connection with the strobe light.
Fig. 1
Except the mentioned subject, the BB-500GE-S is the same as the BB-500GE.
Pin no.
Signal
Remarks
1
GND
2
+12 V DC input
3
Opt IN 2 (-) / GND (*1)
GPIO IN / OUT
4
Opt IN 2 (+)/Iris Video out (*1)
5
Opt IN 1 ( - )
6
Opt IN 1 ( + )
7
Open Collector (-)
8
Open Collector (+)
9
Opt Out 2 ( - )
10
Opt Out 2 ( + )
11
+ 12 V DC input
12
GND
*1: Iris Video output function can be set by the internal DIP
switch (SW601).
Summary of Contents for BM-500 GE
Page 19: ...BM 500GE BB 500GE 19...
