![background image](http://html1.mh-extra.com/html/jai/bm-500-ge/bm-500-ge_user-manual_3231899013.webp)
BM-500GE / BB-500GE
13
6.
GPIO (Inputs and outputs)
6.1
Overview
All input and output signals pass through the GPIO (General Purpose Input and Output) module.
The GPIO module consists of a Look-Up Table (LUT – Cross-Point Switch), 2 Pulse Generators
and a 12-bit counter. In the LUT, the relationship between inputs, counters and outputs is
governed by internal register set-up.
Fig.7 GPIO interface
In the BM-500GE and BB-500GE, the relation for the external interface is fixed as below.
Line Signal
Connector
Line 1
TTL Out 1
D Sub 9P pin #4
Line 2
TTL Out 2
D Sub 9P pin #8
Line 3
Optical Out 1
Hirose 12P pin # 7/8
Line 4
Optical Out 2
Hirose 12P pin # 9/10
Line 5
Optical In 1
Hirose 12P pin # 5/6
Line 6
Optical In 2
Hirose 12P pin # 3/4
Line 7
TTL In
D Sub 9P pin #3
Line 8
LVDS In
D Sub 9P pin #1/2
Summary of Contents for BM-500 GE
Page 19: ...BM 500GE BB 500GE 19...