background image

 

BM-500GE / BB-500GE

 

 

 

3

   

Notice 

 
T

he material contained in this manual consists of information that is proprietary to JAI Ltd., 

Japan and may only be used by the purchasers of the product. JAI Ltd., Japan makes no 

warranty for the use of its product and assumes no responsibility for any errors which may 
appear or for damages resulting from the use of the information contained herein. JAI Ltd., 
Japan reserves the right to make changes without notice. 
 
Company and product names mentioned in this manual are trademarks or registered 
trademarks of their respective owners. 

 

Warranty 

 
For information about the warranty , please contact your factory representative. 

 

Certifications 

 

CE compliance 

 
As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC 
(Electromagnetic compatibility), JAI Ltd., Japan declares that BM-500GE and BB-500GE 
comply with the following provisions applying to its standards. 

EN 61000-6-3  (Generic emission standard part 1 ) 
EN 61000-6-2  (Generic immunity standard part 1)  

 

 

 

FCC 

 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable 
protection against harmful interference in a residential installation.  This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 
-

 

Reorient or relocate the receiving antenna. 

-

 

Increase the separation between the equipment and receiver.

 

-

 

Connect the equipment into a outlet on a circuit different from that to which the receiver 

is connected.

 

-

 

Consult the dealer or an experienced radio/TV technician for help.

 

 

 

Warning 

Changes or modifications to this unit not expressly approved by the party 

responsible for FCC compliance could void the user’s authority to operate the 
equipment. 

Summary of Contents for BM-500 GE





















Reviews: