JAI BB-500 GE, User Manual

Page: 53 / 73

BM-500GE / BB-500GE
51
In case of sequence EPS
The following table shows the minimum trigger interval in synchronous accumulation mode. In
case of a-synchronous accumulation mode, the exposure time should be added to figures in
this table.
Full Scan 2/3 Partial 1/2 Partial 1/4 Partial 1/8 Partial 1/2 V Binning
2077 L 1556 L 1299 L 913 L 722 L 2044 L

The conditions for this table are that shutter speed should be set the same for all
sequences. If the shutter speed is different, the difference of exposure time should be
added.

It is recommended to set the exposure time in the order from the shortest to the longer
one.

The above table shows the interval at PE=2(minimum). In case of the longer exposure, the
interval is ( Value on the table - 2) + Exposure lines.

Do not input the trigger just after the sequence is reset. It requires at least 500ms delay.

ROI can be set by 8 pixels unit in horizontal way. In vertical way, 1 line for B<-500GE and
2lines for BB-500GE can be set for ROI.