31
DE FR EN
EN
Enter the advanced function setting: Press the to switch off the thermostat,Display
will show “OFF”. Press again, it will turn on. Please press Key in next second, it will
into the advanced function setting. You can press to switch the system parameters. At
the same time, press the or with the parameters to modify settings. Select a set of
content. If you do not by the or , the parameters will not modified. If you want to save
the data, you must go through all the functions and exit the system menu.
a
dvanCed
funCtion
setting
Warning: System setting is used to set some important parameters of the system, that’s
only for professionals. Do not make any improper modification. The item already been
debugged and tested by professionals, there is no need to reset.
The thermostat’s display type is LCD segment displaying. There are some different for
the display value and practical value.Please refer to the specific figure:
The system parameters according to the following order:
AdJ>PrG>LtP>SEn>t0P>dt0>dt1>bL>Sat>dEF
