ADwin System with Ethernet Interface
ADwin
58
ADwin
Installation, manual version 2.1, December 2005
9.3 Configuration with
ADconfig
Configure first the settings in the PC then the Ethenet interface by using the
program
ADconfig.
9.3.1 Configuration of the PC
Configure the connection to the
ADwin
Ethernet interface with the program
ADconfig
as follows:
PC configuration
Configure the connection to the
ADwin
Ethernet interface with the program
ADconfig
as follows: (See also chapter 10.3.2). For more information about the
program see the online help of
ADconfig
(button F1).
Add TCP/IP
Advanced…
OK
The
Advanced
settings will normally stay unchanged.
The "
Host
Device
No.
" has no effect during the configuration of the
ADwin
Ethernet interface and should be left on the standard (default) value
150h
.
The difference
Do not mix up the allocation of the "Device No." to the
ADwin
Ethernet interface
with the configuration of the
ADwin
Ethernet interface itself!
The configurations made in this menu are saved on the PC and these settings
are transferred to the
ADwin
driver (
ADwin32.dll
) saying which "Device No."
and which configurations are necessary to access the
ADwin
Ethernet inter-
face.
