ADwin System with Ethernet Interface
ADwin
60
ADwin
Installation, manual version 2.1, December 2005
9.4 Settings in
ADbasic
Now connect your
ADwin
system according to the instructions in your hard-
ware manual.
Checking the settings in
ADbasic
Open
ADbasic
(in the Windows start menu:
Programs
ADwin
ADbasic
)
and check first the settings in the dialog window "
Options\Compiler
".
Set the options in the window: "
Compiler
Options
" from top to bottom
Device No.
–
System
: Select the
ADwin
system which is used.
–
Processor
: Select the pro-
cessor type of the
ADwin
sys-
tem.
–
Memory
: This option is not rel-
evant here.
–
Device
No.
: Select the
Device No. you have used in
the programm
ADconfig
.
The setting "
None
" in the
pull-down list is only neces-
sary in order to compile
AD-
b a s i c
p r o g r a m s f o r t e s t
purposes, when no
ADwin
system is connected.
– Set the options "
Load
Stan-
dardprocesses
",
"
Autostart
" and
"
Remember Device
No.
" later, when working with
ADbasic
.
Confirm with "
OK
" in order to return to
ADbasic
. The driver installation and the
main settings in
ADbasic
are now finished.
Booting
Start
ADbasic
and boot the
ADwin
system by clicking on the boot button
.
The blinking of the green LED on the
ADwin-Gold
system or the CPU module
of the
ADwin-Pro
system as well as the display in the status line: "
ADwin
is
booted
" shows that the operating system has been loaded properly and that
ADbasic
can access the
ADwin
system (if not, first check the connections).
Finishing the installation
For the further installation please keep to the order of installation instructions
in chapter 2 of this manual:
