Jadever JWL Series, Manual

Page: 14 / 20

(II)
JWL 13
/MR
or
TARE/
to check the total accumulation and each accumulation event in detail.
The number of weighments is indicated by Auxiliary display at the left bottom.
XX=Total accumulation
；
XX=certain accumulation
Accumulation Clear
To clear accumulation data (total accumulation data or one of the accumulation events), press key
M-/SET
while the data is displayed. To exit and return to normal weighing mode press key
ZERO/ESC .
7-6 Printer initialization by the indicator operation
1. Press
M-/SET
while powering on to enter parameter setting. Use key
/MR
or
TARE/
to
shift to P09
2. Press
M-/SET
to enter the external device setting. Press
/MR
or
TARE/
to choose the
printer model
3. Shift to certain printer model. Press
M-/SET
and the window will show “UNSUP” or “INIT?”
“UNSUP” means the printer is no need for initialization. Press
ZERO/ESC
to return.
“init?” means the printer is should be initialized. Press
MR/SAVE
to initialize the printer. When
the initialization is finished, the window will show “ok”. And then displays the printer model. Press
ZERO/ESC
to return.
7-7 Input commands
Connect the indicator and computer. Run serial port debugging program on the computer. Input the
capital number “Z”, “T”, “R” ,
“ C ” , “ P ” in the sending area, and the indicator can conduct the
corresponding actions.
Z=zero
T=tare
C=cancel tare
R/P=reading / print
8. Serial Interface