Jadever JWL Series, Manual

Page: 8 / 20

(II)
JWL 7
available, that is you could add article after hold the first value.
HoLd – 4
：
Press key
HOLD/LO/-
to hold. Press any key to release
Sub menu for Hold 3: INF (default: infinity) /10 /20 /50 /100 /200 /500 /1000 2000 /5000
/10000 /20000 /50000
H=current hold value, R=hold value range, d= division, W= actual weight
Keep to hold the value when |W-H|<=R*d, or the scale will exit the hold function. The scale will
cancel the hold function when empty the weighing pan, if choose INF setting.
7.
P06: Check weighing memory
on
：
Check weighing on
off
：
Check weighing off
8.
P07: Check weighing function
on:
Check weighing under the condition that the weight is within the limits and the stable
indication appears
off:
Check weighing under the condition that the weight is within the limits
9.
P08: Check Weighing buzzer beep
Hi
：
There will be a warning sound when the weight of articles exceeds the upper limit, and the
weight is equal or more than 20d
LO
: There will be a warning sound when the weight of articles exceeds the lower limit, and the
weight is equal or more than 20d
ok
：
There will be a warning sound when the weight of articles is between the upper and lower
limit (including the upper and lower limits), and the weight is equal or more than 20d
out
：
There will be a warning sound when the weight of articles is beyond the upper & lower limit,
and the weight is equal or more than 20d
no.beep
：
no beep
10.
P09: External device
= Birch printer
（
BP545,TDP643
）
= Godex printer
= Adhesive sticker label printer
= Zebra printer
= Dot matrix printer
（
CK, SH-24
）
=Large LED display
=Computer