Jade Bird Draco Fire Installation & Operation Manual Download Page 36

Page: 36 / 53

M-P2L1-1 EN

Page 31

Release Date: November 15, 2019

Rev 01

5.5.

Operations available only to users with access level 3

This section describes in detail what functionalities of the panel that a user access level 3, either installer or

maintenance/commissioning personal, can have. For this user access level, the menus for Adjust and Install

are available.

“Adjust” menu tree

The “Adjust” menu tree contains operations typically restricted to personnel trained in the installation &

maintenance of fire systems. These operations will typically be used only during commissioning, expansion

or maintenance of the fire installation.

To enter the adjust menu, the 10-digit password for user access level 3 is required. By pressing the Home

key and then the F4, user can navigate the “Adjust” menu tree by using both alphanumeric keypad and

function keys.

The sub-menu choices from the Adjust menu is as follows:

1. Individual device registration

2. Set address description

3. Assign devices to zones

4. Delays and linkage to SND/FB by zone

5. Set loop class (A or B)

6. Assign device to activation group

7. Enter maintenance company details

8. View analog value curve of detector

9. Configure Day/night mode

10. Set printer

5.5.1.1 Individual device registration

The operator can manually enter the loop number, address/end address and the type of device to either

defining the type of device.

5.5.1.2 Set address description

An operator can add a description for every device manually by entering the sub-menu Set address

description. Both the numeric and alphabetic keypad is available on the interface for the user to choose from.

5.5.1.3 Assign devices to zones

By entering this sub-menu, users can assign specific devices to designated loop. The column Current

indicates the current zone the device has been assigned to. A new zone number can be assigned to each

device by changing the number under the Set column and pressing F5 to confirm the changes.

Summary of Contents for Draco Fire






















































Search results

Summary of Contents for Draco Fire

Reviews:

Related manuals for Draco Fire

Brands by name

Popular brands

Jade Bird Draco Fire, Installation & Operation Manual

Search results

Summary of Contents for Draco Fire

Reviews:

Related manuals for Draco Fire

Brands by name

Popular brands