Jade Bird Draco Fire Installation & Operation Manual Download Page 2

Page: 2 / 53

M-P2L1-1 EN

Release Date: November 15, 2019

Rev 01

Draco and Lyra 21 Series are trademarks of Jade Bird Fire Alarm.

Manufacturer

Jade Bird Fire Alarm International (Europe), S.L.

Carrer de Tarragona 157 7-2,

08014 Barcelona, Spain

REV 01. This document covers control panels with firmware version 1.0.

This product is CE marked and meets the requirements of the following norms and directives:

•

EN 54-2 / UNE 23007-2: Control and indicating equipment for fire detection and fire alarm

systems.

•

EN 54-4 / UNE 23007-4: Power supply equipment for fire detection and fire alarm systems.

•

EN 61000-6-3 Electromagnetic compatibility (Emissions)

•

EN 50130-4 Electromagnetic compatibility (Immunity)

•

EN 62368-1 Safety requirements

•

RoHS Directive 2011/65/EU.

Note regarding: 2012/19/EU (WEEE directive): This product cannot be disposed of as unsorted

municipal waste in the European Union. For proper recycling, return this product to your local

supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection

points. For more information see: www.recyclethis.info.

For additional product and contact information, visit www.jadebird.eu.com.

Summary of Contents for Draco Fire






















































Search results

Summary of Contents for Draco Fire

Reviews:

Related manuals for Draco Fire

Brands by name

Popular brands

Jade Bird Draco Fire, Installation & Operation Manual

Search results

Summary of Contents for Draco Fire

Reviews:

Related manuals for Draco Fire

Brands by name

Popular brands