CALL NOW
800.798.1779
SANCTUARY 1
www.infraredsauna.com
15
Assembly
Instructions Cont’d
1.
Locate the “trap” doors that open in the wood roof.
2.
Connect the black and white cables that that
come out of the side wall to the connector
located in the wood roof.
3.
Connect the green ground wire that come out of
the side wall to the green ground wire that is in
the wood roof.
Push the wiring inside the roof area and close the
roof door compartments.
4.
In the left side wall compartment, there will be
two connectors: 1) Heater connector. 2) Keypad
connector. The heater connector is a two wire
connector. The keypad connector is a seven wire
connector.
1.
Locate the two door handles.
2.
Attach the right side door handle using the enclosed screws.
3.
Attach the left side door handle using the enclosed screws.
11 - CONNECT HEATERS IN ROOF
12 - INSTALLING DOOR HANDLE
BE SURE TO MATCH THE COLORS IN THE CONNECTORS.
THE BLACK WIRE SHOULD MATCH UP WITH THE BLACK WIRE, ETC.
Note
: If you are using a tablet or smartphone to control your sauna, the door handle will act as both
the door handle and tablet/smartphone holder when the door is closed.