J-Allure
Fixed Panels Installation
Locate the guide with the gasket. This is the lower guide. Remove this gasket and install on the top guide. Position
the lower guide on the two fixed panels while they are resting on the floor in an upside down position. Align the predrilled
holes in the guide and panels and screw together with screws and spacers (3.5x45mm self-threading). Attach the
external extrusion of the panels to the guide with 4.2x19mm self-threading screws. The right and left hand fixed panels
are identified by the logo.
Invert the assembled components and install the upper guide following the same procedure as used with the lower
guide. Caulk the top of each fixed panel.
SEALANT
LOWER
GUIDE
SCREWS WITH SPACERS (4)
SCREWS (8)
(4.2x19mm)
REMOVE
GASKET
LOGO
SEALANT
SEALANT
UPPER GUIDE
14
Summary of Contents for J-ALLURE
Page 30: ......