background image

HD-400

HD-400

04

ATTACHING THE LANCE TO THE TRIGGER VALVE  ∙   

MONTAJE DE LA 

LANZA EN LA VÁLVULA

Do not overtighten the screw cap. 

No apriete excesivamente la tuerca.

1∙

  

Lance

 / 

 

Lanza

2∙

 

 Trigger valve /

 

 

Válvula

1

2

21

Rod /

Varilla

Lever / 

Varilla

Flat washers / 

Arandelas

Lock ring  / 

Traba de fijación

∙   Insert the  lance  into  the trigger  valve  

and  secure  it with  the  screw  cap.

Lock ring / 

Traba de fijación

Shaft

 / Eje de la base

Flat washers / 

Arandelas

TIGHTENING THE FASTENING NUT  ∙   

APRIETO DE LA TUERCA DE FIJACIÓN

A

STATEMENT OF LIMITED

 

∙  

GARANTÍA

MÁQUINAS AGRÍCOLAS JACTO S.A.

 

shall warrant the equipment described in 

this manual and shall repair or replace parts and components which, under normal operation 

and wear, in accordance with technical recommendations, show DEFECTS IN MATERIAL 

OR WORKMANSHIP, based on the following conditions.

WARRANT Y PERIOD

∙  

03 (three) years from the date of sale to the original purchaser.

WARRANTY  APPLICATION

∙  

JACTO shall honor this warranty, free of charge, if any part or component shows defect in  

MATERIAL OR WORKMANSHIP, after final analysis at the factory.

THIS WARRANTY SHALL BE NULL & VOID IN CASE OF:

∙  

Misuse of the equipment against specifications in the OPERATOR'S MANUAL, overwork or 

accidents. Preventive/remedial maintenance performed by unauthorized people.

∙  

Use of parts and components not supplied by JACTO. Modification of the equipment or any 

characteristic of the original design.

THIS WARRANTY SHALL EXCLUDE:

∙  Parts which show wear and tear due to use, UNLESS THEY SHOW DEFECTS IN WORK

-

MANSHIP, ASSEMBLY OR MATERIAL.

  Damages resulting from accidents.

 Transportation or freight of the equipment, parts and components in case such warranty is not approved.

GENERAL INFORMATION:

  Parts replaced within the warranty period shall be property of JACTO.

 The warranty on replaced parts and components shall expire together with the equipment 

warranty period.

  Eventual delays in performing services shall not give the owner right either to indemnity or 

to extension of the warranty period.

  JACTO reserves the right to modify its products or to interrupt the manufacture without prior notice.

MÁQUINAS  AGRÍCOLAS  JACTO  S.A.

 garantiza el equipo identificado en este manual, 

obligándose a reparar o substituir piezas y componentes que durante su utilización, en condiciones 

normales y siguiendo las recomendaciones técnicas, presenten DEFECTOS DE FABRICACIÓN O 

DE MATERIA PRIMA, obedeciendo las siguientes reglas. 

PLAZO DE GARANTÍA:

∙ 

3 (tres) años a contar de la fecha de emisión del boleto fiscal de venta al primer propietario.

APLICACIÓN DE LA GARANTÍA:

∙ 

 

La garantía será concedida por JACTO, gratuitamente, desde  que  las  piezas  y  componentes  

presenten defectos  de  fabricación  o  montaje  y  después  de  análisis conclusivo en la fábrica. 

PÉRDIDA DEL DERECHO DE GARANTÍA:

∙ 

 

Utilización del equipo en desacuerdo con las recomendaciones técnicas del MANUAL DE 

INSTRUCCIONES;  con  abusos,  sobrecargas  de  trabajo o accidentes.

∙ 

 

Mantenimiento preventivo/correctivo dado por personas no autorizadas.

∙ 

 

Empleo  de  piezas  y  componentes  no  suministrados por JACTO.

∙ 

 

Alteración del equipo o de cualesquiera características del proyecto original.

∙ 

 

Llenado incompleto o incorrecto de la solicitud de garantía.

∙  Before using the equipment, tighten the 

fastening nut (A). 

IMPORTANT:

 

This operation must be done 

by hand. Do not use any type of tool.

∙  

Antes de utilizar el equipo, apriete la tuerca 

de fijación (detalle A).

IMPORTANTE: 

Ese aprieto debe ser hecho con la 

mano. No hay necesidad de usar herramientas. 

∙   

Monte  la  lanza  en  la válvula y  apriete  

la tuerca  lo  suficiente  para  que  no  haya 

fugas.

 

Summary of Contents for HD-400

























Reviews: