4-62
4
O
PE
R
A
TI
O
N
AN
D
A
D
JU
ST
M
ENT
S
ARBUS 270
Triple wash of chemical containers
After having washed the package contamina-
ted by mix, it is necessary to do a TRIPLE WA-
SHING OF THE CONTAINERS. For this, follow
the instructions below:
• Use personal protective equipment –
PPEs (gloves, apron, overalls, protective
glasses, hat, boots, masks).
• Fill out the package with approximately
1/4 of its volume with clean volume, place
a lid over the package and tighten enough
to avoid leaking during shaking.
• Vigorously shake the package in all direc-
tions for approximately 30 seconds, to re-
move the product residues that got stuck
on the internal walls of the package.
• Remove the package lid and carefully
place water for washing inside the packa-
ge washer.
• Repeat this operation twice.
• Careful not to damage package label pun-
ch holes in the package in order to avoid
its reuse. Avoid damaging package labels
so that the chemicals can be identified af-
ter the package is no longer in use.
NOTE:
This equipment does not have
a backup reservoir for package
washing.
ATTENTION!
After the package is no longer in use they can be temporarily stored in an ap-
propriate place until they are placed at their final destination. Flexible packages
should be stores and returned in specific bags designed for this function.