en-61
MAINTENANCE AND LUBRICATION 8
8.1 MAINTENANCE & LUBRICATION CHART__________________________________
GENERAL MAINTENANCE AND LUBRICATION CHART
Interval
Item
Section
First 50 hours
Visual inspection for damage or wear
Check reel & bottom blade condition
Change Hydraulic Charge Filter Element or earlier if screen
indicates.
-
9.4
8.8
Daily
10 hours
Check pivot points, Lift arms, Rear Axle. Grease if
required.
Check Safety Interlock System.
Check Hydraulic Fluid Level
Check Tires Pressure
Check Engine Bay & Cooling System for Debris
8.1
7.2
8.5
4.4
8.2
Weekly
Every 50
hours
Check for Loose Components.
Check for Hydraulic Leaks.
Lubricate Cutting Unit grease points.
-
-
8.24
End of season
Every 1000
hours
Check Battery Condition.
Change Hydraulic Oil & Filter
Check Hydraulic hoses for damage and wear
8.13
8.8
8.17
Lubricate these fittings minimum weekly or more as conditions and use requires.
A = Arm Pivot B = Unit Mount Pivots C = Roller Bearing D = Motor & Bearing Housing
E = Steering Joints F = Axle Pivot
FLUID REQUIREMENTS
Description
Quantity
Type
Engine Oil - System Total
5 liters
10W 30 (See specification below)
Hydraulic Oil - System Total
23.8 liters
ISO VG 46
Radiator Coolant - System Total
8.5 litres
50% Anti-Freeze
Fuel
45.4litres
EN590 (ASTM D975) Ultra Low Sulfur Diesel
/ (No.2 DULS)
Grease
As required
Shell Gadus 2 or equivalent
ENGINE OIL: MUST BE TO A.P.I. CLASSIFICATION CJ-4 GRADE.
Temperature
Viscosity
Above 25°C (77°F)
SAE30 or SAE10W-30 or 15W-40
0°C to 25°C (32°F to 77°F)
SAE10W-30 or 15W-40
Below 0°C (32°F)
SAE10W-30
