en-20
4 SPECIFICATIONS
4.4
MACHINE SPECIFICATION _____________________________________________
Frame construction:
Heavy duty fabricated steel chassis with box section frame rails.
Cutting unit drive:
Fixed displacement hydraulic motors connected to the cutting unit.
Transmission:
On Demand 4-wheel drive. Direct coupled variable displacement pump to direct
coupled 398 cc for POCLAIN Front Motors,
338 cc rear wheel motors.
Speeds:
Cutting:
0 - 12 km/h (0-7.5mph) Forward
0 - 6.4 km/h (0-4mph) Reverse
Transport:
0 - 14 km/h (0-8.7mph) Forward
0 - 6.4 km/h (0-4mph) Reverse
Steering:
Hydrostatic power steering, with an adjustable tilt on the steering wheel.
Ground pressure:
F407
173Kpa / 1.77Kg/cm² / 25PSI
(Figure quoted as guide only and will depend on configuration of machine. Value
measured with 7knife units and brush kits, Weight transfer disengaged. tire
pressures @18PSI.)
Brakes: Hydrostatic braking with hydraulic parking brakes on front wheels.
Battery:
80 Ah – 680 CCA (Supplied with
Y
uasa L26-80)
4.5
CUTTING PERFORMANCE _____________________________________________
66 cuts per metre at 12km/hr with 11 knife reels.
42 cuts per metre at 12km/hr with 7 knife reels.
F407
4.32 hectares/hr.at 12kph (7.5mph)
F305
3.17 hectares/hr.at 12kph (7.5mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
TIRE PRESSURE
Product
Front Wheel
Rear Wheel
Tire Size
Tire Type
Tire Pressure
Tire Size
Tire Type
Tire Pressure
Standard Tire 26.5 X 14.00 -12 OTR Ultra Chevron
1.37 - 1.72 bar
(12-15psi)
20 x 10.00-8
OTR Grassmaster
1.37 - 1.72 bar
(12-18psi)
