en-43
CONTROLS 6
6.6.1 WARNING OIL PRESSURE FAULT ______________________________________
When this screen is shown, the engine oil pressure has decreased below
the normal level. If this happens during operation, or does not go off when
the engine is run at more than 1000 rpm. Stop the engine and check the
oil level. Top up if necessary.
If the fault persists, do not use the machine at all and contact your local
Ransomes Jacobsen dealer.
6.6.2 WARNING ENGINE OVERHEAT ________________________________________
When this screen is shown, the engine
temperature has risen above the normal
levels.
Park the machine in a safe area
disengage cutting units, set engine to idle
to allow engine temperature to decrease
prior to switching off the engine.
Clean the radiator and screens of all
grass and debris.warning ENGINE
FAULT
When this screen is shown, there is an
engine fault. Stop the engine as soon as possible and contact your local
Ransomes Jacobsen Dealer.
When this fault occurs the machine’s engine may automatically reduce
the power available.
6.6.3 WARNING BATTERY FAULT ___________________________________________
When this screen is shown, the battery is not charging or there is a
charge circuit fault.
1/1
1/1
1234
123.4 Hours
P
1/1
1/1
