CONTROLS 4
en-25
4.4
OPERATOR CONVENIENCE _________________________________________________
T.
MCU Access Panel
Remove thumbscrew and lift up on front of access panel
to view MCU diagnostic lights. Always secure access
panel with thumbscrew when operating.
U. Cup Holder
Used to hold a beverage cup for the operator or may be
used as additional storage pocket. Rubber portion of
cup holder is removable for cleaning purposes.
V.
Storage Compartment
Used to store gloves and other necessary protective
items for the operator.
W. Step
Used to assist operator entering or exiting the
operator’s area.
X. Headlight
Used to provide light when operating in the early
morning or late evening. Light direction can be
adjusted by the operator.
Y.
Pivoting Armrest
Used to position armrest for operator comfort.
Armrest will also pivot out of the way for entering or
exiting on the right side of the mower. Armrest can
also be adjusted to three different heights.
Z. Center Reel Swing Arm Service Latch
Used to secure center reel swing arm in service
position.
AA.Fuel Filler Neck
Used to add fuel to the mower. Only present on
mowers equipped with gas or diesel power modules.
AB.Center Reel Swing Arm Handle
Used to move center reel out from under mower for
servicing. Raise center mower, remove grass
catcher, unlatch arm to swing center reel out, and
latch arm in service position (Z). Do not operate
mower without swing out arm securely latched in
closed position.
AC.Running Light
Light located under operator seat to provide
illumination of center mower and floorboard. Light is
always on with the system power switch (H) in the
RUN position
AD.Hood Latch
Lift handle up and rotate handle 180° counter-
clockwise to unlatch hood. With hood closed rotate
handle 180° clockwise to latch hood. Keep hood
latched when operating mower.
AE. Tie Down
Used to secure mower to trailer for transport.
Figure 4C
48 V
1
2 V
!
AE
AE
Z
AE
AA
AD
W
W
T
U
V
Y
X
AB
AC
