CONTROLS 4
en-23
4.2
INSTRUMENT PANEL ______________________________________________________
A.
LCD Display Unit (LDU)
Used to display and set operating conditions. See
Section 4.5.
B. Mow Switch
Enables and disables the three reel switches
(C, D and E), and switches lift system between
service Mode and mow Mode. Pull up on the
knob the enable the mowers, lower the reels to the
one-touch position, and change the lift system to
Mow Mode. Push down on the knob to disable the
mowers, raise reels to transport position, and change
lift system to Service Mode. See Section 4.9 for lift
system operation.
NOTE: Mower will not start with mow switch in the
ON position.
C. Left Reel Switch
Used to engage and disengage the left reel.
Mow switch (B) must be in the ON (Push front
of switch) position for switch to function. When
left reel switch is moved to the OFF position,
left reel will stop and raise to the crosscut
position.
D. Center Reel Switch
Used to engage and disengage the center reel.
Mow switch (B) must be in the ON (Push front
of switch) position for switch to function. When
center reel switch is moved to the OFF position,
center reel will stop and raise to the crosscut
position.
E. Right Reel Switch
Used to engage and disengage the right reel.
Mow switch (B) must be in the ON (Push front
of switch) position for switch to function. When
right reel switch is moved to the OFF position,
right reel will stop and raise to the crosscut
position.
F.
Horn Switch
Used to sound the audible alarm. Switch is not
active if system power switch is not in RUN
position.
G. Light Switch
Controls operation of the work lights. Press front
of switch to turn lights ON. Press rear of switch to
turn lights OFF. Switch is not active if system
power switch is not in RUN position.
H. System Power Switch
Used to energize the electrical system and start the
hybrid engine if installed. Power switch has three
positions, OFF, RUN, and START.
OFF Position - Power to mower is turned off,
automatic parking brake is applied.
RUN Position - Controllers active, normal operating
mode. Traction controller does not activate until
switch is moved to START position and returned to
RUN.
START Position - Used to activate the mow and
traction system and start the hybrid engine if
installed. See Section 5.4.
J.
Reel Raise/Lower Joystick
Used to raise and lower the three reels. Lift system
operates in two modes, service mode and mow
mode. Individual reels will not lower if the
corresponding reel switch is in the OFF position. See
Section 4.9 for lift system operation.
Figure 4A
48 V
12 V
!
A
E
B
F
J
C
G
D
H