Jacobsen AR331, Safety, Operation & Maintenance Manual

Page: 122 / 230

en-22
5 CONTROLS
5.2.A KEY SWITCH ________________________________________________________
Turn the starter key to the “Start Position” to crank the engine. Let go of the
key when the engine is running and the key will return to the “Run Position”.
NOTE. The glow plugs operate automatically. The engine will not run
from cold until the glow plugs reach their operating temperature.
Turn the starter key to the “Off Position” to turn the engine off.
5.2.B LIGHT SWITCH (OPTIONAL) ___________________________________________
Turns the work lights “On” and “Off”.
Push the top of the switch to turn the lights ON.
Push the bottom of the switch to turn the lights OFF.
5.2.C PARKING BRAKE SWITCH _____________________________________________
Move the orange button to the rear (Towards the Operator) and press the
switch to engage the parking brake.
When the engine is stopped, the parking brake engages.
To release the parking brake, press the opposite end of the switch.
DO NOT apply the brake while the machine is being driven.
5.2.D MOW SWITCH _______________________________________________________
The mow switch engages the cutter rotation.
To cut grass, push the front of the “Mow Switch” (Red Lens End) and move the
joystick forward to lower the cutting means. When engaged the Red lens will
illuminate.
To stop drive to the cutting means, push the bottom of the rocker switch
(Opposite end to the Red Lens).
Note: When the cutting means is raised above 400mm from the ground or
when the operator leaves the seat, blade rotation is stopped.
4374506