Jackson RackStar 44, Installation, Operation And Service Manual, Page: 36 / 80

29
07610-004-33-05-B
DISPLAY PROGRAMMING
TROUBLESHOOTING
PROGRAM
SELECTION MODE
To access Program Selection Mode, the unit should be on and preferably not in
operation (accessing this mode during operation will interrupt the process).
The programming Keys (Up-arrow, Down-arrow, and Select) are hidden on the
display and are shown below outlined with red dots.
1.
Press and hold the I and II Keys until “Program” starts flashing (2 - 3
seconds).
2.
Press the Select Key.
3. Use the Up-arrow Key to change the program number to “6.”
4. Press the Select Key
.
5.
“Program” will flash.
6.
Press the Delime Key to exit.
P R O G R A M
P R O G R A M
6
R E A D Y
C Y C L E 1
1 8 0 F