19
07610-004-33-05-B
INSTALLATION
DRAIN QUENCH KIT INSTRUCTIONS
Instructions
1.
Connect Drain Quench Assembly to the machine drain via 1.5” NPT street elbow (04730-206-32-00).
2.
Orient assembly as shown below:
•
This kit should only be installed by qualified service personnel to reduce the risk of electric shock, serious injury, or
fire. A plumbing permit and the services of a licensed plumber and electrician might be required in some areas.
•
Turn off the power supply and place the dishwasher disconnect (if applicable) in the off position. Lockout/tag-out to
prevent the power supply from being turned back on accidentally.
•
Failure to install this kit within the guidelines might adversely affect safety, performance, component life, and warranty
coverage.
•
Do NOT pull power for the Drain Quench Assembly from the machine! 120V facility power only!
Tools Required
•
Pipe Wrench
•
Adjustable Wrench
•
5/16” Nut Driver
•
3/8” Nut Driver or Wrench
•
Phillips Screwdriver
•
Pipe Thread Sealant Tape or "Pipe Dope"
•
Needle-nose Pliers
!
WARNING
Summary of Contents for RackStar 44
Page 2: ......
Page 73: ...66 07610 004 33 05 B STEAM BOOSTER HEATER SCHEMATICS...
Page 77: ...70 07610 004 33 05 B SCHEMATICS RACKSTAR SIDE LOADER...
Page 79: ......
