57
07610-004-29-29-A
DynaTemp units that are manufactured with the data plate above are able to be field-converted
to different phases and voltages. To accomplish this, your unit should have shipped with the
DynaTemp Phase Conversion Kit, part number 06401-003-71-71. This kit contains the appropriate
decals and schematics to apply to your unit once the conversion is complete.
All work should be performed only by Authorized Jackson Service Agents.
Steps:
1. Perform the appropriate wiring and component changes as necessary to achieve
the desired result. Reference Jackson technical manuals or contact technical service for
assistance.
2. Verify the Schematic is correct. If not, replace with the correct one from the kit.
3. At the power inlet, remove the “Wired For” decal and replace with the one that matches the
configuration of your machine.
ADDENDUM
PHASE CONVERSION KIT
SERIAL NUMBER:
MODEL: DYNATEMP
Made in the USA
Jackson WWS, Inc.
P.O. Box 1060
Barbourville, KY. 40906
(606) 523-9795
09905-004-29-08
460V
WASH MOTOR
230V
208V
3/4 HP
6.6 A 3/4 HP 6.6 A 3/4 HP 1.8 A
WASH HEATER
4.1 KW 11.4 A
5 KW 12.6 A
5 KW
6.3 A
RINSE HEATER
10.5 KW 29.1 A 12.9 KW 32.4 A 12.9 KW 16.2 A
TOTAL LOAD
47.1 A
51.6 A
OPERATING PARAMETERS
MINIMUM WASH TEMPERATURE
150
B
F
MINIMUM RINSE TEMPERATURE
180
B
F
MINIMUM INCOMING WATER TEMPERATURE
70
B
F
RISE BOOSTER
110
B
F
WASH CYCLE TIME
40 SEC
RINSE CYCLE TIME
11 SEC
FLOW PRESSURE
8-12 PSI
208-230-460 Volt/60 Hz/3 Phase
208-230 Volt/60 Hz/1 Phase
WASH MOTOR
230V
208V
3/4 HP
6.6 A 3/4 HP 6.6 A
WASH HEATER
4.1 KW 19.7 A
5 KW 21.7 A
RINSE HEATER
10.5 KW 50.4 A 12.9 KW 56.1 A
TOTAL LOAD
76.7 A
84.4 A
70
B
F RISE BOOSTER
24.3 A
70
B
F RISE BOOSTER
XXXXXXXXX
