17
07610-004-29-29-A
TROUBLESHOOTING
DISPLAY PROGRAMMING
PROGRAMMING
To access programming, the unit should be on and not in cycle.
The programming buttons (Up-arrow, Down-arrow, and Select) are hidden on the
display and are shown below outlined with red dots. There is a full-size display
template at the end of the manual to help locate the programming buttons.
Factory Setup (Model Selection)
1.
Press and hold the I and III Buttons until “Program” starts flashing (2 - 3
seconds).
2.
Press the Select Button.
3.
Use the Up-arrow or Down-arrow Button to change the program number to “4.”
4.
Press the Select Button
.
5.
“Program” will flash.
6.
Press the Delime Button to exit.
P R O G R A M
P R O G R A M
4
R E A D Y
C Y C L E 1
1 6 0
F
