Jackson DishStar HT Installation, Operation And Service Manual Download

Page: 5 / 68

DISHSTAR

Undercounter dishmachine; high-temperature, hot-water

sanitizing, with a booster tank and

detergent and rinse-aid chemical feeder pumps.

DISHSTAR

Undercounter dishmachine; low-temperature, chemical-

sanitizing, with detergent, rinse-aid, and sanitizer chemical

feeder pumps.

DISHSTAR

LT-H

Undercounter dishmachine; low-temperature with wash tank

heater, chemical-sanitizing, with detergent, rinse-aid, and

sanitizer chemical feeder pumps.

The manufacturer provides

technical support for all of

the dishmachines detailed

in this manual. We strongly

recommend that you refer to

this manual before making a call

to our technical support staff.

Please have this manual with

you when you call so that our

staff can refer you, if necessary,

to the proper page. Technical

support is not available on

holidays. Contact technical

support toll free at

1-888-800-5672.

Technical support is available

for service personnel only.

NOMENCLATURE

Summary of Contents for DishStar HT





































































Search results

Summary of Contents for DishStar HT

Reviews:

Related manuals for DishStar HT

Brands by name

Popular brands

Jackson DishStar HT, Installation, Operation And Service Manual

Search results

Summary of Contents for DishStar HT

Reviews:

Related manuals for DishStar HT

Brands by name

Popular brands