REMOTE SENSOR INSTALLATION
REMOTE SENSORS
INDOOR SENSOR WIRING
There are two types of remote sensors. The T-32-S1 is a single sensor that can be used
indoors or outdoors. The T-32-S2 contains two sensors. A combination of both sensors
can be used for indoor temperature averaging with or without the onboard sensor.
Use separate 18-2 shielded cable when wiring sensors to prevent interference.
When the T-32-S1 is used as an indoor sensor, the T-32-TS can be configured to allow
only the remote sensor to control the temperature or a combination of remote and
onboard sensors can be used for temperature averaging. Refer to 18:TT in the installer
setup menu to select the proper remote sensor option. The indoor sensor wires to
terminals S1 and SC.
S2 SC S1
T-32-S1
SENSOR
FIGURE 5
47
