Jackson MSC 10AB-N70, Installation And Operation Manual

Page: 35 / 116

If a switch is found to be defective, replacement can be achieved by placing the new switch next to the old
one. To make sure the new switch is not upside down, line it up with the keyways. Transfer wires one at a
time to the new switch. If this is not practical, pull wires off, one at and tag them for the proper replacement.
Put switches back into panel, make sure switch protrudes through panel properly, tighten both nuts, and
replace control panel on remote controller box. Power can now be applied to the dish-machine and run
through cycles checking all operations.
1. Connection terminals
2. Inside nut
3. Panel plate
4. Outside nut
5. Bar or toggle handle
Technical Manual (07610-003-97-40)
Page Created: 09-10-2012
Revised: N/A
30
1
2 3
4
5
FUNCTION OF SWITCHES, CIRCUIT BREAKER & INDICATING LIGHTS (CONTINUED)