Jackle inoMIG 350, Operating Manual

Page: 36 / 68

inoMIG 350/400
Operating manual Page 34
24. Overview control functions
Functions MC 1 MC 2
Thyristor welding source
■ ■
Manual mode
■ ■
Automatic mode
■ ■
Wire feed rate tuning
■ ■
Material adjustment
■ ■
Welding power individual adjustable
■ ■
MIG mode
■ ■
TIG mode – with adjustable pre-flow time and slope-down time
■ ■
MMA mode – with adjustable Hotstart
■ ■
2-cycle, 4-cycle, spot welding
■ ■
Crater program
■
Backup function for user programs (100 pieces)
■
Gas test
■ ■
Wire feed in
■ ■
Cooling medium flow indicator
■
Cooling medium min flow adjustable
■
Welding power adjustable over material thickness, direct - step less
■ ■
Start speed (Sts) adjustable
■ ■
Burn back time (bUb) adjustable
■ ■
Gas post flow time (PoG) adjustable
■
Gas pre flow time (PrG) adjustable
■
Spot time (Spt) adjustable
■ ■
Welding choke adjustable
■
Welding choke predefined
■
Remote control function user adjustable
■
Welding cable length adjustable
■
Water pump ON/OFF
■
Machine type adjustable
■
Update for welding curves
■ ■
Control unit lock / unlock
■
Fan / water pump (if installed) controlled
■ ■
Display HOLD time adjustable
■ ■
Reset to factory settings
■ ■