LCD Screen Button
Press the power button to check the remaining battery.
AC Button / DC 12V Button / USB Button
P O W E R
L C D
Power of Input & Output (W)
Please ensure the power consumption is less than 200W,
then press the power button.
Low & High Temperature Alarm
The Explorer 290 can power your devices at
temperatures ranging from -10~40°C (14~104°F). If your
working temperature is outside this range, the
Explorer 290 may stop working.
Power Level Percentage
Check the battery level by pressing the display button
before use. If battery is at a low level, charge first.
LCD screen flickers 10 times when battery capacity drains
to 20% and 10%.
If the Jackery Explorer’s total output exceeds 200W, it
will automatically shut off.
Turn off each output by pressing its power button as it does
not turn off automatically or it will drain the battery out.
Wall Charger Car Charger
D C I N P U T
Solar Panels(optional)
100W Solar Panels
Before use or storage, plug your Explorer 290 into the wall until it is fully chaged. If the LCD shows less than 20% capacity,
plug it into a power source, like an AC outlet or a solar panel, as soon as possible. There are four ways to recharge your
Jackery Explorer:
R E C H A R G I N G
Wall Charger
Around 5.5 Hours
Car Charger
Around 6.5 Hours
Around 5 Hours
(Optional)
(Depending on Weather)
USB Output
Smartphone (18W max)
About 29 Recharges
Motion Camera (5W max)
About 52 Recharges
Car Port
Car Fridge (60W)
About 19 Hours
AC Output
12”Laptop(30W)
About 4 Recharges
32” TV (60W)
About 4.3 Hours
Drone
About 6 Recharges
C H A R G I N G
Here are some common devices and their power requirements for each charging port.
Explorer 290 will be turned off automatically in 12 hours when being drawn under 10W power for power saving.
CPAP Machine
About 6~21 Hours
Car Port
LCD Screen Button LCD
DC Input
AC Output
USB Output
Summary of Contents for Explorer 290
Page 1: ......